Re: Timing setup questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Timing setup questions



===========================================================
Bounces like rubber! Shatters like ceramic! Discover Crazy 
Aaron's Thinking Putty in grown up handfuls. It's the 
creativity unleashing, mood enhancing desk toy!
caab7pJb7yoMza/ Crazy Aaron Enterprises
===========================================================


joey sounds like the cam is 360 degrees(crank degrees) out from the crank. it 
will run but things would be less confusing if the cam was rotated 180 
degrees to line the dots up. remember there are 720 degrees to a cycle. crank 
rotates twice for every camshaft rotation.

[Non-text portions of this message have been removed]

===========================================================
Your opinion counts! We?re conducting a survey for a 
computer service/repair company. When you complete our 
survey, you will also be entered into a drawing for one of 
ten $100 prizes. Just click
caab6Pib7yoMzf/ Val Rad
===========================================================
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz. 









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.