RE: Engine pulling suggestions

[threecarb65@xxxxxxx]

===========================================================
Let University of Phoenix make 2004 your year. Evening, 
weekend or FlexNet® classes ? over 130 locations. Look 
into our programs and get the degree that gets you going!
caab6aBb7yoMza/ UOP
===========================================================



Andy, there are two major differences in pulling a Poly 318 and a 350 chevy #1 the Poly weighs more and #2 and most important,when you get the Poly out you will have a really good engine to build,when you pull a 350 chevy all you end up with is scrap iron,Good luck Stan

===========================================================
Graduate in less than 13 months with AIU?s Online virtual 
campus. Classrooms and student service as close as your 
computer. Highly accredited, study anytime ? anywhere.
caab6anb7yoMzf/ AIU
===========================================================



----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.