RE: Dumb timing chain install question

["Westerlund, Ken" <kwesterlund@xxxxxxxxxx>]

===========================================================
INSTANT CAR INSURANCE QUOTE! Save time, save money, and 
get the best deal. Get quote, buy, and print insurance 
cards online!
caab599b7yoMza/ Insurance4usa.com
===========================================================

I think your cam sprocket dot should be at 6 o'clock.

-----Original Message-----
From: Joeydahook9@xxxxxxx [mailto:Joeydahook9@xxxxxxx] 
Sent: Monday, April 05, 2004 12:15 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Dumb timing chain install question

  I'm puttin a mopar timing set on a 440 with a mopar 509 cam.  If I set
the 
"dot" on the crank sprocket at 12 o'clock and the cam sprocket at 9
o'clock, 
the #1 piston is about 1/2" down from TDC.  I'm putting the crank pully 
straight up with no advance.  Is this normal?  I'm assuming the keyways
have nothing 
to do with cam/crank timing.  Any help gladly accepted.  Thanks once 
again....Joe

--
[Non-text portions of this message have been removed]

===========================================================
Graduate in less than 13 months with AIU?s Online virtual 
campus. Classrooms and student service as close as your 
computer. Highly accredited, study anytime ? anywhere.
caab6anb7yoMzf/ AIU
===========================================================



----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.