Re: polygraphite bushings sound

[Thomas R Hansen <trandco1@xxxxxxxx>]

On Thu, 18 Mar 2004 18:12:37 -0500 Tom Duross <tduross1@xxxxxxxxxxx>
writes:
> I wonder if long fiber grease would work.
> I use this with diesel engine - pump couplings made by Faulk.
> They are flexible and this stuff is real thick and sticky, gets on
> everything.
> Use disposable gloves!
> 
> Tom Duross
> 
> Tom, 
   The problem Juan has, is he already has the front end assembled. The
grease is used when putting the bushings together, but it doesn't last
forever.{I thought it was assembly grease, that came with my PST kit}  If
you were to figure a way to put the zerk fittings on the upper control
arm bushings, and be able to get grease to both the inner and outer
diameters, that would be the cure. I suggested silicone spray because it
will soak into the areas needing lube, and won't collect dirt.   Tom  

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.