Re: Hardtop Window Seal R&R

[Donald Gallimore <dongallimore@xxxxxxx>]

Sounds like it's not as challenging as I thought.  At least I don't have to bend that stainless steel tab at the top. 

 

Thanks to the responders. 

 

Akron Don Gallimore

From: Mike & Deb <mdlefevre@xxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Mon, December 26, 2011 12:44:03 PM
Subject: Re: Hardtop Window Seal R&R

Don,
I'm doing mine. I'm polishing the SS strips today. The seals are glued in but you can tear them out. Once started out you can pull them by hand-at a 90 degree angle. The folded area at the top seems to have been filled with some type of sealer. I think a little weatherstrip adhesive will anchor the new ones as you slide them in from the bottom.
Mike LeFevre

On Dec 26, 2011, Donald Gallimore <dongallimore@xxxxxxx> wrote:

I need to replace the vertical seal between the front and rear window on my '65
Satellite.  I have the seals. The concern is it looks like you need to bend the
stainless steel bracket at the top to R&R the seal and I don't think I can bend
it back without a permanent wrinkle.  Anyone done this and can offer any
pointers/experiences?
 
Akron Don Gallimore

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.