Exhaust "bypass" valve? Also..timing

[Jacob Fox <imfast101@xxxxxxxxx>]

How do I remove/disable the exhaust bypass valve on the exhaust manifold? It rattles and is super noisy going down the road...hopefully it can be done without removal of the manifold. Never removed them and really don't wanna twist any bolts off. 

Okay timing. Had a lot of "valve noise" on accelerating and A LOT when I punch it. I removed vacuum line from distributor and adjusted to 10 btdc. Being that 10 is the only number on my timing stub I guess that's what that is. Now after putting it back together and taking it in the road...no difference.  Plus it had a rough idle. Now I noticed when I adjusted it to 10btdc with vacuum advance still on, it idled smoother...didn't have any noise, but taking off and in turns it almost dies...what should I do to get it right!? It doesn't have points, electronic ignition. 

Sent from my iPhone

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.