Re: Pertronix 40,000 Volt Flame Thrower Coil

["Dennis C." <dennis.2914@xxxxxxxxx>]

Ted,

If you don't have a wiring diagram for your car and per your post it
looks like it is a 65 Coronet check this site:

http://www.mymopar.com/60to65_wiring.htm

Diagram "B" shows the ballast resistor and the 4 wires attached to
it.

This is a nice site, it has a nice selection of wiring diagrams for
our cars.

Dennis C.

On Jun 7, 5:58 pm, cudaus1 <cuda...@xxxxxxxxx> wrote:
> Hi Everyone,
>
> Have a question for all of you ignition system specialists. I just
> purchased a Pertronix 40,000 volt flame Thrower coil to go along with
> my Ignitor point less system. The system that just replaces the
> points. Not the whole distributor.
>
> Anyway, the box says, 1.5 ohm suitable for cylinder 8 engines.
> Replaces most canister type coils in distributor- type inductive
> Ignition systems. Not suitable for capacity discharge or distributor
> less systems.
>
> The info inside the box explains how to check to see if you have a
> resistor. Now, I know that these cars have a ballast resistor on the
> firewall. However, I don't know if they are speaking of another
> resistor. It says that if you have a resistor,you need to remove it.
> I'm lost. Can anyone help?
>
> Thanks,
> Ted
> 65 Dodge Coronet 500
> 383

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.