Re: '64 Chrysler Questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: '64 Chrysler Questions




Hi Tony

What part of Australia?

I am in Melbourne and own a 63 Dodge Polara with a 318 poly that I have just rebuilt (but not yet started)

Jim

-----Original Message----- From: Tony Mokomoko
Sent: Tuesday, December 07, 2010 2:10 PM
To: 1962to1965mopars@xxxxxxxxxx
Cc: anthony.mokomoko@xxxxxxxxxxx
Subject: RE: '64 Chrysler Questions



Hello to all the '62-'65 Mopar enthusiasts,



Yes, agree - the 15" wheels are the way to go. I read Bruce's email with
interest as I have recently obtained a 1962 Dodge Phoenix down here in
Australia (it would be a 4 door Dart in the USA, but they were sold here as
a Phoenix - being RHD). I am lucky in that my wife purchased it for my 50th
birthday, so that I could relive the past, i.e. when I was 18 I owned a '62
Dodge Dart (left hand drive). As a result I am also a new member to this
forum - and have been busy reading.



Anyway, my old girl has the 318 Poly fitted which I am going to stick with.
I have already made contact with Gary Pavlovich and I'm now on the hunt for
bits and pieces to build a mildly warmer engine. Additionally, just
yesterday I ordered a new set of Cragar one piece alloy wheels in 15" (8"
for the back, and 7" for the front) as I want that "old school" look, with
the spinners. In recent years I have been down the path of 18" & 20" wheels
on cars such as the 300C, and Tickford Falcon I owned ... and they are
nothing but headaches, i.e. there is just no give in the tire if you hit a
pothole, or drive over a curb. They make the ride hard, and let's face it -
unless you have spent thousands on suspension - then they are a waste of
time. In some people's eye's they look good - so I guess it's all in the
eye's of the beholder. There is a great site down here
http://www.showwheels.com.au where you can see Mopars fitted with the big
wheels for those interested. However I'm looking forward to fitting my
Cragars with some tall BF Goodrich tires to give it that old drag racer
stance.



But for now - my task is to get my old girl back on the road, hunt down the
bits and pieces I need - and just enjoy driving my '62. This one is a
keeper, and will be in the family for many years to come. I'm keen to hear
from anyone who has access to spares for the '62 Dart or Polara. I'm looking
for parts like an original steering wheel, drivers side headlight bezel,
etc. I can be contacted on my personal email address of
anthony.mokomoko@xxxxxxxxxxx



Here's wishing you all a safe and happy festive season.



Regards,



Tony Mokomoko

Gold Coast

Australia



-----Original Message-----
From: Doug Jacobsma [mailto:big_jake57@xxxxxxxxxxx]
Sent: Tuesday, 7 December 2010 11:02 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: RE: '64 Chrysler Questions







Yeah, what he said!!  Ultimately it's your car,, your money,, but to me,
those giant rims and tiny tire sidewalls just look goofy on an old car.
They ride like hell too.



Love the '64 Chryslers.  Had 3, some of the nicest drivers I ever had.
Tried to give a parts car away a couple years back, but no takers.  Looks
like interest is picking up!



Have fun with the car!



Jake

'63 Sport Fury 'vert













To: 1962to1965mopars@xxxxxxxxxx

From: cory_383@xxxxxxxxxxx

Subject: RE: '64 Chrysler Questions

Date: Mon, 6 Dec 2010 09:59:32 -0600









Well Bruce, sounds like a cool ride.  For your disc brake conversion kit
contact Scarebird.  I found them on ebay.  Kit comes with everything.  BTW,
don't put those big rims on your car.  In my opinion, old cars with
bling-bling rims look just simply awful.  Stick with the 15" rim for God's
sake please!!



Cory from Saskatoon



65 Polara with a 440

80 Aspen slant six



> To: 1962to1965mopars@xxxxxxxxxx

> From: bbuntain@xxxxxxxxxxx

> Subject: '64 Chrysler Questions

> Date: Mon, 6 Dec 2010 10:52:22 -0400

>

>

>

>

> Greetings to all those afflicted with Mopar Madness,

>

> I'm hoping that I'm doing something right here - namely getting in
contact with other Mopar fans through this e-address. I just stumbled on the
'62 to '65 Mopar site while surfing the internet for information, so this is
the first time I've used the site to send an e-mail. I trust that I have the
right e-address and others can read this (I did 'sign up').

>

> I recently bought a 1-owner 1964 Chrysler with 64,000 miles on the odo.
The car is a 2-door hardtop 300 (non-letter) Silver Series. The car was
originally purchased new in South Dakota, although I bought it from Indiana,
from the original owner's grand daughter. The car was complete, stock, and
in running condition, although it had been sitting in a garage for several
years, just being started and run up and down the driveway a few times a
year. While there are no rust issues, the car still wore the original paint
and had a few dings and dents.

>

> The car is now in Nova Scotia, Canada, where my home is. Unfortunately,
there are very few of these C-body cars of this vintage in this 'outatheway'
corner of the world, and no suppliers of resto parts. The car is now in a
friend's autobody shop, being stripped down to bare metal and having the
dings and dents removed before being suited up with a new pair of clothes,
using original color codes in a non-stock, 2-tone color scheme.

>

> I intend to use the car as a 'driver' and will not restore it to
absolute stock, but changes will mostly be confined to 'upgrades' rather
than modifications. While the car is in the body shop, I am trying to source
the parts and pieces that I want or need for the car. Unfortunately, what is
making this a little harder is the fact that I am currently working in
Beijing, China, so everything has to be sourced by e-mail, and this
compounds my difficulties. I will be back in Nova Scotia for a month this
winter, and for the summer, but right now, this is sort of a long-range
effort with things back on the Nova Scotia end being handled for me by some
friends.

>

> If anyone out there can answer a few questions for me, I would
appreciate the assistance. In particular, there are two things I am
currently trying to find out:

>

> 1. Where can I find headers for this car? I haven't been able to source
any headers for C-bodies. While I've had a decent dual exhaust system put on
it, the set of headers I did order that were supposedly for a C-body turned
out to be for a B-body. I had to get the shop to install the pipes to the
stock exhaust manifolds, but would like, at some point, to be able to put
headers on the stock 383 engine. Anyone got any ideas about where I can find
headers for "Walter"?

> 2. I want to put alloy rims on the car, preferably 17" or 18" rims with
a diameter of 7", 8" or 9" (I'm flexible on the exact sizing). My problem is
that from Beijing, I am unable to judge what might fit and what won't. I
gather from past (long past) experience with older rear-wheel cars that I
will likely need something around 0 degrees offset, but most rims I have
looked at on the net (and some that my friends have found and tried for fit)
have too much positive offset. I could go with vintage style 15" rims from
American Racing or similar, but would prefer a larger diameter as above. My
question here is: does anyone know what the required offset and/or back
spacing would be to fit the aftermarket rims on without getting contact on
body or suspension? I know the bolt pattern and certerbore size, but not
offset/backspacing, especially for the larger diameter rims. Even a close
estimate would be appreciated.

> 3. Finally, I will need, at some point in time, information on front
disc-brake conversion kits, a source for a passenger side external rear-view
mirror (which I gather, from what I've seen from pics of these cars, must
have been a rather rare option), and dash pads. My dash pad is not ripped,
but is warped in two places.

>

> Of course, any and all information concerning parts and pieces, resto
information and general information on the car would be appreciated. I am
sort of hoping to be able to locate and order at least the rims before I get
back to Nova Scotia this winter so they can be installed before I return
once again in the summer. By the way, can I attach pictures with my e-mails
on this site?

>

> Anyway, if anyone knows anything that might be of help, it would be
greatly appreciated. I guess you could reply through the topica site, or you
could e-mail me directly at: bbuntain@xxxxxxxxxxx

>

> Keep the revs up and the wheels down,

>

> Bruce Buntain

>

>

>

> --

> [Non-text portions of this message have been removed]

>

>

> ----

> Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic. Thanks!

>

> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:

> http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.

>

>



--

[Non-text portions of this message have been removed]





----

Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!



1962 to 1965 Mopar Clubhouse Discussion Guidelines:

http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.











----

Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!



1962 to 1965 Mopar Clubhouse Discussion Guidelines:

http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.



[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.