Re: DOT 3-4 verses DOT 5 silicone.

[Gary Wilson <Gwwilson67@xxxxxxxxx>]

Just be sure that you flush the system really good before installing dot 5.  
Can't mix them. 




----- Original Message ----
From: "mcmanus2301@xxxxxxx" <mcmanus2301@xxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Thu, October 14, 2010 8:02:06 PM
Subject: Re: DOT 3-4 verses DOT 5 silicone.




I have had the same experience with Dot 5 silicone brake fluid.  I was told not 
to use it on my last car build.  I did it anyway because of good luck I have had 
with it.  I solves all my brake fluid related issues just as Steve mentioned.

On a side note.  My son raced Gokarts nationally for ten years.  We had all 
kinds of corrosion, rust and hydroscopic problems with brand new racing 
gokarts.  We started changing out the brake fluid to Dot 5 when we got the 
Gokarts new.  It solved all of our brake problems.

Scott from Louisiana 






-----Original Message-----
From: MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Thu, Oct 14, 2010 9:51 pm
Subject: DOT 3-4 verses DOT 5 silicone.


This topic always seems to stir debate. In my 56 Chrysler, I put all new M/C 
wheel cylinders and all lines . Here is why I like DOT 5 silicone: no corrosion 
anywhere. - will not hurt paint, my M/C has no sighn of rust and the paint is 
like new on it after 6 years--firewall around it has no rust, unlike it did have 
from brake fluid corrosion also corroded on my 64 odge. --No sighn of swollen 
rubber parts anywhere. Same testimony from others that have done the same as I. 
. I just can't buy the water separation theory. If the brake lines and wheel 
cylinders are completly bled of air, There is no room for condensation to form 
and so no water tn the silicone. No water-no rust. From my first hand 
experience, I think I will use DOT 5 in my 64 Dodge. Just my 2 cents worth 
.......................MO 

{Steve Mick} 
http://stevemick.shutterfly.com/pictures#Part%202 ; 
---- 
Please address private mail -- mail of interest to only one person -- directly 
to that person. I.e., send parts/car transactions and negotiations as well as 
other personal messages only to the intended recipient, not to the Clubhouse 
public address. This practice will protect your privacy, reduce the total volume 
of mail and fine tune the content signal to Mopar topic. Thanks! 


1962 to 1965 Mopar Clubhouse Discussion Guidelines: 



[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly 
to that person.  I.e., send parts/car transactions and negotiations as well as 
other personal messages only to the intended recipient, not to the Clubhouse 
public address. This practice will protect your privacy, reduce the total volume 
of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and 
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 


This email was sent to: Gwwilson67@xxxxxxxxx

EASY UNSUBSCRIBE click here: u/?bUrDWg.ciqSe3.R3d3aWxz
Or send an email to: 1962to1965mopars-unsubscribe@xxxxxxxxxx

For Topica's complete suite of email marketing solutions visit:
?p=TEXFOOTER
--^----------------------------------------------------------------