Hijacked (SV: Dog dish or no dog dish, that is the question)

[Knud-Erik Holm <kebh@xxxxx>]

I just put the numbers together, I did get a shock! I have currently
purchased for over 18.000 Usd. Parts for the 62 sport fury.

That was not the plan! It just took on a life of its own.

Have a nice weekend,

Knud erik Denmark

-----Oprindelig meddelelse-----
Fra: Gary H. [mailto:62to65mopar@xxxxxxxxxxx] 
Sendt: 2. oktober 2010 17:46
Til: 1962to1965mopars@xxxxxxxxxx
Emne: RE: Dog dish or no dog dish, that is the question



That same Web site has a 1964 Dodge listed.

http://tinyurl.com/2ajz2gu

I have an interchange book that has pictures of hub caps. Unfortunately 
it is a homemade version published by photocopy machine, so the quality 
of the graphics are very poor. The 1964 Dodge DD caps look about the 
same as the Plymouth counterparts in these graphics. If I had to guess 
the Dodge caps appear to be very slightly taller than the Plymouth 
counterparts, but that could be in illusion. The book lists two versions 
of DD for Plymouths, one has beveled ridges at the area that attaches to 
the wheel, the other one is smooth in that area. The smooth one has #259 
as a caption; the 1964 Dodge DD has #130 as a caption.

Thanks,
Gary H.    

David Bailey wrote:
> Like Dooner stated, this is really peaking my interest too. So where are 
> the nitty gritty nitpickers that really know their Mopar stuff? My 
> earlier reply was that I thought there would have been a difference 
> between Plymouth and Dodge dog dish hubcaps but maybe not? Or, might 
> there be a very slight variation of the same cap for both Plymouth and 
> Dodge? Case in point, the link Gary H provided of that beautiful 64 Ply, 
> (best of show automotive). If it's safe to say the caps on that Ply are 
> correct, that is fully polished, then could it be that the same cap I 
> described earlier but with the brushed satin ring might be correct for 
> the Dodge? 
> I wonder because I have a mix of caps, all the same except some are full 
> polished while others have that satin ring. I've also seen pics of both 
> types and been told by less than authoritive people that the satin ring 
> type is correct for the 64 Dodge. Is this so? I don't know but would 
> like to find out.someday. 
> Thanks 
> Dave B      


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.