Re: wheels wanted
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: wheels wanted



Steve,

I have 15"x7" cop wheels on the back of my Belvedere.  I like how they look.  I agree that you should be able to sell them if you want to.  I've seen some that need to be fixed up selling for up to $50., but usually they're cheaper than that if they need to be painted.  I have one extra 15"x7" cop wheel for sale for $50.  It's sandblasted, primed, and painted gloss black - all ready to go.  I had 3, but sold 2 the other day.

Dave

  
--- On Tue, 3/23/10, MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx> wrote:

> From: MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx>
> Subject: Re: wheels wanted
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Tuesday, March 23, 2010, 10:07 PM
> 
> Thanks all for your responces, Again I learned from the
> good folks on this mai-list.  In using 8 inch wide rims
> which are actually closer to 9" rim edge to rim edge. I may
> be cutting things to close for my fenderwell
> clearance.  Most of the recommendations for the tire
> size I want to use calls for the 8" I am thinking cheater
> slicks or stickey street tires.  I have a chance at 7"
> cop wheels close to me and priced at $30 for the pair. I
> think I will go ahead and buy them so I can mock them up and
> get actual clearance measurements. I am sure at that price,
> I could probably swap meet them and make a couple bucks. Any
> more input is welcome and if someone has one or two of the
> 8" wheels, let me know. I have possibly found one. Thanks
> all.........................MO
> {Steve Mick}
> http://www.1962to1965mopar.ornocar.com/mick64.html
> 
> ----- Original Message ----- From: "MO ( Steve Mick)"
> <micher@xxxxxxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Tuesday, March 23, 2010 1:28 AM
> Subject: wheels wanted
> 
> 
> > 
> > I need a pair of 4 1/2" circle Mopar steel wheels 15x
> 8 with backspace right at the center ( about 4 1/2 inch from
> the inner rim edge.) I have been told that an earlier Dodge
> Ramcharger had these as OEM wheels  Anyone know if that
> is right or have some wheels to sell?
> Thanks...............................MO
> > 
> > 
> > {Steve Mick}
> > http://www.1962to1965mopar.ornocar.com/mick64.html
> > 
> > 
> > ----
> > Please address private mail -- mail of interest to
> only one person --  directly to that person. 
> I.e., send parts/car transactions and negotiations as well
> as other personal messages only to the intended recipient,
> not to the Clubhouse public address. This practice will
> protect your privacy, reduce the total volume of mail and
> fine tune the content signal to Mopar topic.  Thanks!
> > 
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and
> 
> > 
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> 
> 





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.