RE: K Frame Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: K Frame Removal



I made and used this very tool.  No issues.

Christopher Glick
1964 Dodge 440 2 dr hrdtp

----- Original Message -----
From: Gary H. <spigot2039@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Mon, 14 Dec 2009 23:47:37 +0000 (UTC)
Subject: RE: K Frame Removal


We don't mind that you ask. :) 

Here is a home-made tool from the "tech-tips" page:

Mopar Torsion Bar removal: "Take 2 2x4’s about 8" long, at about 2.5" cut a notch. The notch will go around the Torsion Bar. Drill 2 holes 1" away from the notch on either side. Take 4 nuts and bolts and sandwich around the Torsion Bar. Smack the wood with a small sledge hammer to remove the Torsion Bar." -- Dustin C. 

Thanks,
Gary H. 

-----Original Message-----
>From: Rick Gilmore 
>I don't have a tool, but there is nothing that should have the arms in tension mode. I have, by holding the upper control arm moved up and down as far as I can and have shook, wiggled and done every thing I know to do and nothing. Hell I hate to ask for help but these things are new to me and have kicked my butt to the tune of 2-3 hours trying to remove them. I'm ready to fire of the cutting torch.
>
>Rick


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER






Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.