Contact me 303-437-8902 ________________________________ From: "dwalters@xxxxxxxxxxxx" <dwalters@xxxxxxxxxxxx> To: 1962to1965mopars@xxxxxxxxxx Sent: Mon, December 7, 2009 1:09:16 PM Subject: Crank pulley needed... I need an OE (no reproductions) steel crank pulley. I'm looking for a generic Mopar 6-1/4" to 6-1/2," single groove pulley that measures 1-5/8" OR 2" from the mounting face to the CL of the groove. It also needs to have 6 mounting holes and a 2-1/4" ID hub hole. Please contact via email. Thanks, Dave Walters Aurora, Co. ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. -- [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. This email was sent to: arc.6265@xxxxxxxxxxxxxx u/?bUrDWg.bSONJP.YXJjLjYy ?p=TEXFOOTER