Thanks folks for all the good suggestions--any more is welcome. Another ideah I was given: Soak fiberglass cloth matt in Por-15 silver. I don't know what difference the silver would be, but it might look more purty :-) One thing I see is, with a POR-15 treatment, all the rust would not have to be wire brushed off-- just oil frre..............................MO ----- Original Message ----- From: "fmichael graham" <intiaboats@xxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Wednesday, November 11, 2009 3:26 PM Subject: Re: Small holes in floor and trunkI'd suggest a few coats of POR-15, with JB Weld for the hole filler. I'm in the process of performing a hole filling job on a '56 Coronet floorpan - welding - and, even for a guy who earns his living as a welder, this job sucks! Best of luck with your project!
Mike --- On Tue, 11/10/09, MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx> wrote:
From: MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx> Subject: Small holes in floor and trunk To: 1962to1965mopars@xxxxxxxxxx Received: Tuesday, November 10, 2009, 5:56 PM My Dodge has several holes ( 1/8" and under) im the floor and the trunk floor.. The surrounding metal is probably rather thin, but not bad enough to weld in patches. In the past, I have coated these areas with fiberglass woven cloth and resin. But since fiberglass and metal expands and contracts at different rates, the patches sometimes loosen up.. Anyone have a different way to seal up these holes and strengthen the thin areas without welding? Thanks for any input....................MO ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.
__________________________________________________________________Ask a question on any topic and get answers from real people. Go to Yahoo! Answers and share what you know at http://ca.answers.yahoo.com
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html.