Re: 440 carb size

[Roger Pettigrew <dodger7998@xxxxxxx>]

In a  perfect environment, and allowing the fact that a carburetor  will 
actually flow 500cfm, it would mean that your engine could run a maximum of  3927 
RPM . so the choice is yours
 
In a message dated 6/8/2008 6:24:00 P.M. Central Daylight Time,  
ajaremea@xxxxxxxxxxx writes:
 


Need to know if a 500 cfm eddy carb is too small for a 440  street car. I 
have two mint 500's from a dual quad setup that I only had on a  car for 2 
months. Would it be worth it to buy a new 600 or 750 eddy for the  440? I hate to 
buy another carb when I have two sitting on the shelf still in  the boxes. Just 
don't know it one 500 carb is too small.
Thanks,   Alex

--
[Non-text portions of this message have been  removed]


----
Please address private mail -- mail of interest to  only one person -- d
irectly to that person.  I.e., send parts/car  transactions and negotiations as 
well as other personal messages only to the  intended recipient, not to the 
Clubhouse public address. This practice will  protect your privacy, reduce the 
total volume of mail and fine tune the  content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse  Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.  







**************Get trade secrets for amazing burgers. Watch "Cooking with 
Tyler Florence" on AOL Food.      
(http://food.aol.com/tyler-florence?video=4?&NCID=aolfod00030000000002)

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.