Another ignition issue
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Another ignition issue



I was sitting in traffic last Sunday waiting to get into a cruise-in. 
The Polara was running about 210 degrees and started to miss. I barely 
got it off the road before it died. Restarted once, then no spark. I 
assumed it was the orange box (whole ignition was new 2 years ago) I did 
the GM HEI conversion, still no spark, so I thought maybe it was the 
distributor. The whole system was from Jegs as a set, distributor, 
harness, resistor, and orange box, probably Proform. I swapped in an old 
distributor, still no spark. I made sure the HEI was grounded. I'm not 
very proficient at electronics, so I'm kinda at a loss as to what to do 
next. How does power flow... from the car's harness through the coil 
first? Coil is a 2 month old Accel. Any suggestions? 

Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.