Re: Oil Filters Revealed

[Dan McCormack <mcwheels@xxxxxxxxxxxxxx>]

I always used Fram for years until I read a test like this (it might have 
been this one) a couple of years ago. And I was having a problem with the 
440 in my 63 Fury. Occasionally on start up the oil pressure would not come 
up immediately and the lifters would clack. I've not had the problem reoccur 
since I switched to NAPA (Wix) filters. I still have a new Fram filter 
sitting on the self. If somebody wants it they can have it.

Dan


----- Original Message ----- 
From: "Bill" <Y1TopBanana73@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, April 22, 2008 2:48 PM
Subject: Re: Oil Filters Revealed


> The results of this is why I haven't used Fram for years...JUNK, JUNK, 
> JUNK!
>
> Bill M
> 65 Coronet 500 'vert
>
> >  spigot2039@xxxxxxxxxxx wrote:
> >  >
> >  > Hi all,
> >  >
> >  > This article is linked from the 62-65 Mopar Site's Tech page; I just
> >  > revised the link as I discovered the study had been updated in 
> > January.
> >  > If you want investigative reading about oil filters, check it out.
> >  >
> >  > http://www.knizefamily.net/minimopar/oilfilters/index.html
> >  >
> >  > Thanks,
> >  > Gary H.
> >  > 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.