Re: 63 Polara 500 questions

[harry skalla <moweepea@xxxxxxxxxxx>]

ADMIN: Topica's Web based bulletin board is broken since 1-1-2008. Members using that are unable to read or send messages. Topica says they are fixing. We will see. Sorry for the hassle. I am thinking of moving this discussion to another format / address. -- Gary H -- Contact me at 62to65mopar AT ornocar DOT org.

WOW!!!!
Butch
----- Original Message ----- 
From: "Leslie Thrasher" <redred1@xxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Saturday, January 05, 2008 7:04 PM
Subject: Re: 63 Polara 500 questions


> ADMIN: Topica's Web based bulletin board is broken since 1-1-2008. Members 
> using that are unable to read or send messages. Topica says they are 
> fixing. We will see. Sorry for the hassle. I am thinking of moving this 
> discussion to another format / address. -- Gary H -- Contact me at 
> 62to65mopar AT ornocar DOT org.
>
> Here is my guess!!!! #1-Windshield Washer Foot Pump, #2-Trunk Liner,
> #3-Premium or Regular with Octane Boost, #4-Your service manual should 
> list
> height and where to measure from!!!  Your Welcome, Thank you and Good 
> Night
> you'all
> ----- Original Message ----- 
> From: "Jim Altemose" <jaltemoose@xxxxxxxxx>
> To: "1962to1965mopars" <1962to1965mopars@xxxxxxxxxx>
> Sent: Saturday, January 05, 2008 8:49 PM
> Subject: 63 Polara 500 questions
>
>
> > Thanks to all for previous answers.
> >
> > As I peel the layers of my recently acquired 63 Polara 500 onion (I
> > like onions), I find interesting things and questions.
> >
> > 1. It's a push-button auto.  There's a pedal on the floor way up
> > underneath by the dimmer switch.  It has a small round pad.  You might
> > think it's the e-brake release, but it's not.  What is it?  Any tips
> > on how to use it?
> >
> > 2. It's a very original 79,000 mile car.  In the trunk is a gray
> > cardboard liner along the fender walls and underneath the typical gray
> > vinyl mat.  I'd never seen this before, but it certainly appears
> > purposely form fitting and original.  I'm guessing it's typically long
> > trashed by moisture and what-not and discarded.  Any insight or
> > history on this?
> >
> > 3. In an engine this old with no rebuild, what's the best gas to use?
> > I've put in Premium.  Should I be using lead additives to help the
> > valve seats, or something like that?
> >
> > 4. Rear end seems a little saggy.  Is there a way to check the correct
> > height?  I saw previous emails about this.  Can the springs be re-bent
> > or should they be replaced after a certain number of miles or years?
> >
> > As always, thanks.
> >
> > - Jim
> > Jim Altemose, Long Island, NY
> > '63 Polara 500 (Max Wedge)
> > '63 Polara 500 (383)
> > '65 Belvedere I (Street Wedge)
> > '71 Bronco
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.