Back to the stall converters.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Back to the stall converters.



Man Guys,
I'm now more confused than ever.
As I first thought, the stall speed of the converter
meant that the engine would rev up higher rpms
(depending on the rated stall speed)to get it going or
moving.
Then Don told me "no, it does not do that". Unless I
misunderstood. It sounded like it would make the car
move just like an oem converter.
Just out of curiousity, and wanting to gain more
knowledge about the converter and stall speeds, I
found these. I read, and it talks about higher rpm and
slippage before the vehicle moves.
AAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHH!!!!!!!!!

HHHHEEEELLLLPPPP!!!!

Look at these and help me make sense of this please. I
know I'm probably being stupid, but I would like to
know more about this.
And by what these say, it sounds like a higher stall
is a bad thing. Transmission heat from the slippage.

http://www.bankspower.com/Tech_understandstallspeed.cfm

http://www.bankspower.com/Tech_understandtorqueconver.cfm

Harold (Dooner) Funderburk


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@







Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.