Re: {Chrysler 300} 1962 Wiper Motor - A snafu

[msgcot2@xxxxxxxxxxx]

did you repace a o0ne speed with a 2 speed? if so the switch is also a one speed

                                   Stanley Cotler

 

------ Original Message ------
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Sent: Sunday, May 3rd 2026, 14:06
Subject: {Chrysler 300} 1962 Wiper Motor - A snafu
 

Have installed a refurbished wiper motor.

 

When I turn the ignition switch ON - The motor actuates, yet the Wiper Switch is in the OFF position.   If I then move the Wiper Switch knob to the low or high speed…..that stops the Wiper Motor. 

 

What upside-down world am I living in?

Thanks!

 

Matt Allyn

(562) 533-2551

 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to unsubscribe@xxxxxxxxxxxxxxxx">chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1514256433.5646413.1777831569009%40mail.yahoo.com.
 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/56951ba7.4fa.19defa11b5f.Webtop.106%40optimum.net.