{Chrysler 300} 300 H carb
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 300 H carb



Hello all, Attached is a picture I took today of my uncles 62 Sport. Many of you are aware of this car, it has gotten around a bit the last couple years. It has a inline dual setup just like an H would have with the 413. My question is does anyone know of any videos, or documents I could use for adjusting the carbs? The car runs but has never run quit right, it has always seemed rich to me. I am fairly handy mechanically, but have never had much experience or skill adjusting carburetors. When I took it to this bridge today to take the pictures the car did not want to idle at all. Previously it idled fine, had the carbs and intake off at one point and it has not been right since. I tried to adjust it a while back and made it worse, and now I don't recall which screw I even turned.

--

 

photo

 
 
 

Drew Carl
Owner, eScore 

Phone: 724-288-6636

Email: Drew@xxxxxxxxxxxx

Website: www.escoremx.com

Address: 523 Westland Rd. Hickory PA 15340

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/0427b252-d84a-4a46-add3-a99fbe103711%40escoremx.com.

Attachment: 1700026 crop.png
Description: PNG image



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.