Re: {Chrysler 300} 400hp 300F Air Cleaner element?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 400hp 300F Air Cleaner element?




Noel sent me a pic of Joe Jordan’s 400hp F and it has neither the angled braces nor the under hood pad so that’s how the taller air cleaners achieved the required clearance. (Although it looks like Gregg’s car does have the pad in the pics Bob sent but not the braces.)

I had toyed with the idea of using the taller elements on our F but now will leave it stock. 

Thanks for all the detailed input, Gents! 

Keith

On Sep 29, 2024, at 12:34 PM, 'John Lazenby' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:


The filter element on the 4 speed cars was taller and the way the extra clearance was accomplished is the removal of the angled hood brace above that area.

John Lazenby

On Sunday, September 29, 2024 at 09:25:16 AM PDT, 'Bob Jasinski' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:


Keith,

Is the filter element really different?  Attached is a photo of the Gregg Ziegler "Flying Mile" 300F engine compartment I took in 2008 at the Monterey auction where the car was displayed.  As you point out, there is a noticeable gap at the bottom of the air cleaner that the 375 HP cars don't have.  Could it be the same filter element with a shorter air cleaner top?  Theoretically this would provide less restrictive engine breathing.  If the filters were actually taller, wouldn't hood clearance be an issue? 

Bob J

-----Original Message-----
From: 'Keith Langendorfer' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Saturday, September 28, 2024 11:54 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} 400hp 300F Air Cleaner element?

Folks

From the photos I’ve seen of the engines in these cars, it looks like the AC filter element is taller in the same  housing as the stock 375hp cars?

Does anyone know what the Wix, et al part number would be?

Keith

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/C7A7670F-42D4-4F08-9EBD-7AA0417D53A3%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.

To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/042d01db128c%240cae1be0%24260a53a0%24%40comcast.net.

<DSC_3682.JPG>
<DSC_3681.JPG>
<DSC_3683.JPG>

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/2810FB9D-0B2F-4D0D-9DEC-F7CB533C5D74%40yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.