{Chrysler 300} Radiator Hose Corbin Clamp tool?

["'Keith Langendorfer' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Folks

I’m replacing the hoses on the F and I’m using the Corbin style self adjusting single wire clamps ‘ala the original style. I’m having a devil of a time with the lower radiator hose clamps. I have a set of single wire hose clamp pliers that I’ve had for probably 50 years but I’m not getting the leverage I need to fully open the lower clamps to move them into the correct position, particularly on the water pump. I see that there’s a Gearwrench Vermont pliers product that has a ratchet feature (which my current pliers do not have and which would make the job far easier.) I also see a plethora of products that have a ratcheting handle that runs to a remote set of jaws at the end of a cable that would seem to make it easier to get to the hose/clamp position on the underside of the water pump.

Thoughts/suggestions?

Thanks,

Keith



-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/549CF3C9-5A19-4CA6-A07B-6EE7ED8CB4F2%40yahoo.com.