{Chrysler 300} 300G antenna hole on fender.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 300G antenna hole on fender.



Hello to all in 300 land.
Can anyone confirm the location of the pass side fender hole for a radio antenna please.
My fender antenna hole looks to have been made rather crudely, so I just want to make sure it is located at the right place before getting the fender painted...
The center of the hole on my fender is about 16 1/8 inch from the rear pointed fender tip (measured in a straight line) and about 6 Â¼ inch from the inside edge.
Thank you.
Jean-Yves Chouinard. 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/LV8P222MB1309BD38BD39D9CCAB877FE0AE872%40LV8P222MB1309.NAMP222.PROD.OUTLOOK.COM.

Attachment: 102_1499.JPG
Description: 102_1499.JPG

Attachment: 102_1500.JPG
Description: 102_1500.JPG



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.