Paul, I have been pleased with filter kits from Hot Heads. I used one on a 331 Hemi and another on a 315 hemi. I would think one for a 392 would be similar. What I like is the change from a bypass filter system to full flow / 100% oil filtered system. Also, it does not need to be excessively remote. It can be mounted in a convenient logical place, virtually invisible. A side note, Paul. Marilyn and I will be forever grateful for the time you spent with her when she was confined to a wheelchair at Gil and Carol’s place in Florida many years ago. Thank you again!!! Bill and Marilyn Allen Sent from my iPhone > On Aug 6, 2024, at 6:46 AM, Bob Merritt <bob@xxxxxxxxxxxxx> wrote: > > > Looking for opinions from those that have installed a remote oil filter > > on their 1957 392. The good, the bad, where did you get the pieces, etc. > > Replies to > > Paul DelGrande <paul@xxxxxxxxxxxxxxxxxxxxxxxx> > > -- > For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang > --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. > To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. > To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/98a7e05f-0f27-4778-82b3-9298f2cba47f%40simplexco.com. -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/F67C7286-0EB8-476F-A17D-A48B1B3B33AA%40gmail.com.