My tranny guy removed my leaky pan and used a ball peen hammer to create downward facing bumps around each bolt hole. This enabled each bolt to exert more vertical force against the gasket and allow for additional gasket compression. Leaks eliminated. Similar Belleville washers are slightly dished to hold and spread bolt force.
Rich Barber in still hot, hot, hot Brentwood. Electricity here is 45 cents/kWh and scheduled to go up.
From: 'bill grieve' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Sunday, July 21, 2024 11:55 AM
To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 1962 300H trans filter
Hi again. Is it possible to run a later transmission filter and pan on my 1962 transmission? I have a serious pan leak that I haven't got to seal up. Any help would be greatly appreciated. Thanks. Bill Grieve.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1430137218.1773554.1721588111607%40mail.yahoo.com.
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
.
