Thanks Bob and Carl…
On internet land I looked at some photos and saw it both ways which tossed me for a loop.
Best, James
From: Carl Bilter <cbilter@xxxxxxxxx>
Sent: Thursday, June 13, 2024 10:04
To: James Douglas <jdd@xxxxxxxxxx>; Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx) <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Power Steering Bracket Question
James, the brace goes between the power steering bracket and the block. The ps bracket is attached over the compressor brace.
Carl
------ Original Message ------
From "'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
To "Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx)" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Date 6/13/2024 11:09:14 AM
Subject {Chrysler 300} Power Steering Bracket Question
I am reworking a power steering bracket on the ’64.
What I need to know is the brace that comes down from the A/C compressor go between the power steering bracket and block or does it go over the power steering bracket. The share the same bolt.
The bracket is bent a little and I want to make sure that the opening is sized correctly.
Any one the answer on this one? I could not find any photos in the MPB or Service Manual that show this.
Thanks, James
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171A9CF0F820ED40A3246EF93C12%40CY5PR19MB6171.namprd19.prod.outlook.com.
Attachment:
64 300K Power Steering 1.jpg
Description: JPEG image
Attachment:
64 300K Power Steering 3.jpg
Description: JPEG image