{Chrysler 300} Power Steering Bracket Question

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I am reworking a power steering bracket on the ’64.

 

What I need to know is the brace that comes down from the A/C compressor go between the power steering bracket and block or does it go over the power steering bracket. The share the same bolt.

 

The bracket is bent a little and I want to make sure that the opening is sized correctly.

 

Any one the answer on this one? I could not find any photos in the MPB or Service Manual that show this.

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171A9CF0F820ED40A3246EF93C12%40CY5PR19MB6171.namprd19.prod.outlook.com.