Hello All, I am just ready to check the shop manual, but I thought I would ask the experts! I replaced by Fuel Gauge with a rebuilt one from Jeff Carter. So far, so good. The new one moves up and is close to Full. I did not start the engine, but all looks promising. I noticed a Cream colored wire (single with push on black connector) that seems to be loose and not connected. It is near the left side by the shifter. It looks like the shifter has a dual wire connected at the bottom (assume neutral safety switch or back up lights ?) If anyone knows where a single cream colored wire goes, please let me know. I am looking at the shop manual, but that does not always give a clue to the exact location to plug in. Thank you! Regards, Mark Lindahl ’63 300 Conv. For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/05dd01dab449%2439b3ade0%24ad1b09a0%24%40sbcglobal.net. |
Back to the Home of the Forward Look Network
Archive Sitemap