Re: {Chrysler 300} AFB question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} AFB question



I see the 'bumps' or 'keys' on the bottoms, thanks.  That makes the instructions in the manual about keeping them oriented more mysterious to me, if they actually can't be put in incorrectly due to these 'bumps'?

On Tue, Dec 5, 2023 at 5:35 AM Bob Merritt <bob@xxxxxxxxxxxxx> wrote:

Here are pictures of the primary and secondary venturies.

You can see notches in the bases. Those notches mate with

locating bumps in the carb body.

They can not be installed right on left or left on right.

Bob



On 12/4/2023 7:29 PM, John Nowosacki wrote:
I was reading my 60 Service manual over the weekend, and I saw something interesting in the carb section on AFB rebuilding.  There were instructions highlighting the fact that the venturi assemblies were not interchangeable left to right.  Not an issue during any of my rebuilds over the years, as I always did one side and then the other, and did not have them both out of the carb at the same time when cleaning them and installing new gaskets, but since the gaskets seem identical, what is the difference between the left and right side assemblies?  Are there identifying marks/numbers on them anywhere?  Next time I take mine apart, I'd like to double check that they weren't switched side to side during some past rebuild before me, since I didn't acquire my car until 1998, some 38 years after it was originally put together.  I'm guessing that the written warning was there because the assemblies could be reversed in their positions and the carbs would still go back together, but would somehow be wrong and not operate as designed?
 
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD%2B8cnuZ8tJftW98oJaOjsd4%2BwG6hgyeQzsDr53GOqkm9WVBNQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/deb2ad9c-9cca-4d7b-99ec-3853e17fb919%40simplexco.com.

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD%2B8cnuaizz%3DkYv%2BMnLn%2BLa9wqf3aWxV29ThoqKv0i-XQwxtjg%40mail.gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.