Re: {Chrysler 300} Brake fluid

["'dave mason' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

John-

Go for Dot 5 (silicone) if you can.  Requires replacing all wheel cylinders, master, and flushing lines.  

Dot 5.1 is not silicone and will grab onto moisture like Dot 3.  

Otherwise looks like you could just bleed everything thoroughly with 5.1, but, it will still soak up moisture at your wheel cylinders.  

D&K

Sent from my iPhone

On Oct 5, 2023, at 15:39, mguarneri via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:



I just saw this article (see below) in the latest Rock Auto newsletter.  And not wanting to do something that would cause break, I mean brake failure, would I be safe to say if I replaced (complete flush) Dot 3 with Dot 5.1 in my G, I would not be compromising safety?

 

John

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1361763691.11843253.1696534762565%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/AFA44B08-E8CC-4263-84E9-01F7EEE1C066%40yahoo.com.