RE: {Chrysler 300} 57 Chrysler Shop Manual

while on this pink feed is “on “ 12 v all the time , i have had 3-4 cars ( F) where it corrodes in driver kick panel plug , turns green . (12 + dampness?) That means no roof lights

Sent from my iPhone

On Feb 20, 2023, at 2:33 PM, Ron Waters <ronbo97@xxxxxxxxxxx> wrote:

I do a scan out of the shop manual. Then I can make as many prints as I want. When one gets too wrinkled or marked up to be usable, I print off another.

The actual nature of my search was the difference in wiring for the map and pocket panel lights on the convertible vs the map and roof rail lights on the 2dr HT. In this case, my 59 Dodge convertible. I eventually found that info in the 58 Dodge shop manual. After scanning the schematic, I got a little fancy (see attachment).

Ron

From: Henry A. Mitchell III [mailto:hamlll@xxxxxxxxxxxxxx]
Sent: Monday, February 20, 2023 1:23 PM
To: 'Rich Barber'; 'Ron Waters'; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: RE: {Chrysler 300} 57 Chrysler Shop Manual

Quite a while ago, when I was working on the wiring of my 300C, I took a photo of page 401 of my Chrysler Service Manual, made a 2ft x 3ft poster of it and hung it on the wall so I could see the diagram no matter where I was in the car. it is still there and I still refer to it occasionally.

Henry Mitchell

300C

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Rich Barber
Sent: Monday, February 20, 2023 12:04 AM
To: 'Ron Waters' <ronbo97@xxxxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: RE: {Chrysler 300} 57 Chrysler Shop Manual

body.pdf (jholst.net) Pages 400-403. It’s in Section 14-Body

Rich B.

Brentwood, CA

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Ron Waters
Sent: Sunday, February 19, 2023 6:27 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} 57 Chrysler Shop Manual

Just curious about this. I was looking for some electrical info in the 57 Chrysler shop manual and I noticed that there are no electrical schematics at all. This is just strange, since my Desoto, Dodge and Plymouth shop manuals all have pretty comprehensive schematics. What do 300C and 300D restorers do in this case ?

Ron

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/FF072BD8A7C04BA285B0CA3F215B943C%40ThinkPadL520.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/010701d94501%24e183b7d0%24a48b2770%24%40ez2.net.

This email has been checked for viruses by Avast antivirus software.
www.avast.com

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/5020DE4B149A4402AA632D201F0538BF%40ThinkPadL520.