Re: {Chrysler 300} TRW Power Steering Pulley Puller

[John Grady <jkg@xxxxxxxxxxxxxxxxx>]

Hi Garry ??looks the same as both an alternator pulley puller and a generic non adjustable cast iron puller with a bolt in a cheap set ? 

Have to pull on hub as you all know .

on this —- one thing that always bothered me was pressing back on . Usually a tin cup kind if closure in back , perhaps should be supported by a carefully sized plug or something . Risk of doing something bad seems to be obvious if thousands of pounds push moves something or destroys thin spacer or insulating washers often on armature shaft in front of rear bushing  . Never saw instruction about that . Heads up 

Sent from my iPhone

On Feb 10, 2023, at 7:34 PM, Gary <garythepartsdoc@xxxxxxxxxxxx> wrote:



James,

 

I custom machined one that grabs onto the snub like factory, not the pulleys. I may still have it. Gary

 

 

From: 'James Douglas' via Chrysler 300 Club International

Sent: Monday, February 06, 2023 9:17 PM

To: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx)

Subject: {Chrysler 300} TRW Power Steering Pulley Puller

 

Anyone know of a modern tool number or set that DIFINITIVLY works well pulling the pulley off of the TRW power steering pumps without distorting the pulley?

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617199253B8164336E294D1D93DB9%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/BA6456C16DA7463B94199D72F8F92E3B%40OwnerPC.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/BC3A7EFA-A478-4E9A-9309-1675A36DC9C4%40gradyresearch.com.