Re: {Chrysler 300} TRW Power Steering Pulley Puller

["Gary" <garythepartsdoc@xxxxxxxxxxxx>]

James,

 

I custom machined one that grabs onto the snub like factory, not the pulleys. I may still have it. Gary

 

 

From: 'James Douglas' via Chrysler 300 Club International

Sent: Monday, February 06, 2023 9:17 PM

To: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx)

Subject: {Chrysler 300} TRW Power Steering Pulley Puller

 

Anyone know of a modern tool number or set that DIFINITIVLY works well pulling the pulley off of the TRW power steering pumps without distorting the pulley?

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617199253B8164336E294D1D93DB9%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/BA6456C16DA7463B94199D72F8F92E3B%40OwnerPC.