RE: {Chrysler 300} Putting a square peg in a round hole
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: {Chrysler 300} Putting a square peg in a round hole



What I hate is that sometimes the chrome is a little thick on the bolt holes and the square wants to pull in hard on the bolt and that can then crack the chrome around the bolt hole and over time you get rust starting there. I take a file and file the holes open just a bit before I take bumpers to the chrome shop so that when plated the bolt will fit without it biting in.

Thanks for the heads up on the lights. I vaguely remember having to do that twice!

James 

-----Original Message-----
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Bob Merritt
Sent: Friday, February 10, 2023 03:37
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} Putting a square peg in a round hole

I'll chime in with one of my square peg experiences.

I was working on the rear bumper of a 64. I had it off for

re-chrome. That alone took 3 months. When I went to install it,

time had passed so I forgot "the trick". I installed

the bumper, shimmed it for near perfect alignment and was

pretty pleased. Then I went to install the back up lights.

Whoops. The back up lights must be installed in the bumper

before the bumper is installed on the car.

Everything I do I do twice.............and sometimes more than twice.....



-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/80033a76-452e-e057-8bbd-97bb7b342804%40simplexco.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61718F74E4BB0A5E442093B993DE9%40CY5PR19MB6171.namprd19.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.