Fwd: {Chrysler 300} Just A Heads Up
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: {Chrysler 300} Just A Heads Up





---------- Forwarded message ---------
From: Steve <saforwardlook@xxxxxxxxx>
Date: Wed, Feb 8, 2023 at 1:29 PM
Subject: Re: {Chrysler 300} Just A Heads Up
To: william ELDER <belder@xxxxxxxxx>


Just a thought.  If you haven't already signed up with Just Dashes to recover your dash pad I would strongly recommend you go with a replacement dash pad from RD Autoline out of Sweden.

They make those dash pads using new molds and they are perfect replacements for your G (or H).  The ones you would get if you go through Just Dashes would look "puffy" and clearly look like what they are - an attempt to make yours look better with another cover on top of your original that is a reasonable try, but no cigar from what I have seen.  

There are some photos of your dashpad in this RD Autoline link:   http://autoline.se/?lang=en_us

The wait time to receive yours from RD Autoline and also the cost would likely end up being less expensive and less of a wait compared to Just Dashes.

Steve Albu

On Wed, Feb 8, 2023 at 12:58 PM william ELDER <belder@xxxxxxxxx> wrote:

I am replacing the dash pad on my 300G.  I read through the blog from Just Dashes to give me a leg up on this project.  I got to the rear view mirror removal, working through the speaker hole, even the radio is out.   I tried to get a 1 3/8 socket on the mirror nut.  Just dashes indicated that the nut was 1 3/8.  I just couldn’t get a socket on it, so I cut a perfectly fine 1 3/8 combination wrench in half, it was too long to fit inside the dash.   So after wasting a lot of time and effort, I finally realized the nut is 1 7/16.  Just in case any of you have to remove the rear view mirror.

 

Regards

bill

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/003501d93c00%24146043e0%243d20cba0%24%40cogeco.ca.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAMrBHoLcXyK8zJfLgsDBiErUH35HFv8fXwU7cJNWw88G206jag%40mail.gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.