{Chrysler 300} 1963 - 1964 Power Steering Hose (Pressure Side)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 1963 - 1964 Power Steering Hose (Pressure Side)



Anyone have a source for the correct length power steering hose on the pressure side?
 
Mine is 33 inches long, I think a Gates 352700. The MOPAR number is 2201-764 which is shown as a cross reference to it.  However, it is obviously shorter than the original as it cannot be routed over the drivers side valve cover and the tube end at the pump is much shorter than I remember and there is limited movement angle with this gates or clone hose.
 
Thanks, if anyone has an alternative.
 
James
 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/MN0PR19MB61659BECD3C4D5FE2B0D631D931B9%40MN0PR19MB6165.namprd19.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.