{Chrysler 300} Clutch fan, pump and bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Clutch fan, pump and bolts



Hi All,
 
Trying to get the bolts into the pump to mount the clutch & fan is a PITA. One has to “hang” the unit with one very loose bolt to be able to get the others started as they want to hit the clutch hub otherwise. 
 
Has anyone had any success placing exactly the correct length studs into the pump side, with red Loctite, and then using nylocs nuts on the thing?
 
I can get the bolts in with serrated lock washers, but like I said it is a PITA.
 
I have the radiator out and it is a pain, on the road if something should require it, it would be even harder with the radiator in.
 
Thanks for any suggestions.  James
 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61719A3DCFD3F92A13374CAB93069%40CY5PR19MB6171.namprd19.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.