Re: {Chrysler 300} 300F Shock Absorbers

On Sun, Oct 23, 2022 at 1:33 PM Bob Jasinski <rpjasin@xxxxxxxxxxx> wrote:

For those that have an interest, I just pulled out my receipt for the KYB shocks installed on my G. I purchased them from Summit in 2008, 2 each, KYB-KG4507, and 2 each, KYB-KG5511, $38.95 each, not sure which pair is front or rear. I’ve put about 5,000 miles on the car since then and like them a lot. In addition, I just went out and examined them with a flashlight, and see no leaks at all. Prior to the Pasadena meet, I had the car on my 2 post asymmetrical lift, lifting from the frame, bleeding the brakes, changing the oil, and rotating the tires. It was on the lift about two days, and has been many times since the shocks were installed in 2008. No shock oil leaks.

Bob J

From: dplotkin <dplotkin@xxxxxxxxxxxxxxxxxxx>
Sent: Sunday, October 23, 2022 11:12 AM
To: Bob Jasinski <rpjasin@xxxxxxxxxxx>
Cc: finsruskw@xxxxxxxxxxxxxxx; 'Cox' <scooter465@xxxxxxx>; 'ridgleyracing65' <ridgleyracing65@xxxxxxxxx>; 'Chrysler 300 Club International' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} 300F Shock Absorbers

Agreed Bob. No reason a two post lift can't be used for maintenance. Shouldn't bother good properly installed shocks.

Dan

Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: Bob Jasinski <rpjasin@xxxxxxxxxxx>
Date: 10/23/22 1:26 PM (GMT-05:00)
To: dplotkin@xxxxxxxxxxxxxxxxxxx
Cc: finsruskw@xxxxxxxxxxxxxxx, 'Cox' <scooter465@xxxxxxx>, 'ridgleyracing65' <ridgleyracing65@xxxxxxxxx>, 'Chrysler 300 Club International' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} 300F Shock Absorbers

Danny,

I’m not talking about storing a car that way, I’d never do that, it makes no sense to do so. I’m talking about routine work that must be done with the suspension parts hanging. Tire rotation, brake work, or any of the many uses and reasons I, and many shops own a lift. I had my lift for 33 years and have used it on many different cars, never had a problem. Chrysler even shows lift points in the manual, so I beg to differ.

Bob J
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of dplotkin@xxxxxxxxxxxxxxxxxxx
Sent: Sunday, October 23, 2022 10:17 AM
To: Bob Jasinski <rpjasin@xxxxxxxxxxx>
Cc: finsruskw@xxxxxxxxxxxxxxx; 'Cox' <scooter465@xxxxxxx>; 'ridgleyracing65' <ridgleyracing65@xxxxxxxxx>; 'Chrysler 300 Club International' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} 300F Shock Absorbers

Bob-

Generally speaking it is undesirable to store a car long term with the suspension hanging. Especially newer cars with complicated suspension and lots of bushings. Nevertheless the bushings and suspension parts are best stored in their natural, loaded condition. If you want to avoid flat spots on tires put the car on jack stands.
But hanging suspension stresses everything including shocks.

Danny Plotkin
-----Original Message-----
From: "Bob Jasinski" <rpjasin@xxxxxxxxxxx>
Sent: Sunday, October 23, 2022 1:04pm
To: finsruskw@xxxxxxxxxxxxxxx, "'Cox'" <scooter465@xxxxxxx>, "'ridgleyracing65'" <ridgleyracing65@xxxxxxxxx>
Cc: "'Chrysler 300 Club International'" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} 300F Shock Absorbers
Dave,

Thanks for your comment, it is disturbing to read. I’ve had the KYBs on my 300G for about 14 years, and have a lift that lets all the wheels hang. I’ve never had a problem, and this is the first time I’ve heard of lift use causing damage to the shocks. Could you elaborate a bit because this is the first time I’ve heard this. Anyone else have KYBs that had this issue? As far as I know they are the best shock out there for many (not sure on the years) letter cars.

Bob J

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of finsruskw@xxxxxxxxxxxxxxx
Sent: Sunday, October 23, 2022 7:28 AM
To: 'Cox' <scooter465@xxxxxxx>; 'ridgleyracing65' <ridgleyracing65@xxxxxxxxx>
Cc: 'Chrysler 300 Club International' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} 300F Shock Absorbers

Only issue I had with them was leaking on the rears.
You cannot leave the rear axle suspended from the shocks without anything under it.
The travel will be at it’s extreme end and will induce a leak if left that way for an extended length of time.
I found this out the hard way.
Dave Schwandt

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Cox
Sent: Sunday, October 23, 2022 9:09 AM
To: ridgleyracing65 <ridgleyracing65@xxxxxxxxx>
Cc: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 300F Shock Absorbers

As John Hertog and I
Found out the best shocks
To firm up a big Chrysler
Are the KYBs.
They do a great job cars
Handle much better in the
Curves and ride is great
Not to firm.

Bob Haag

On Oct 23, 2022, at 10:02 AM, ridgleyracing65 <ridgleyracing65@xxxxxxxxx> wrote:
This subject is primarily about my 300F, but most probably applies to all the unibody "Letter Cars". What shocks are Club members using on their cars? My car currently has standard, probably generic, Monroe-Matics. They are just too "soft" and I can't believe they are anywhere close to the "stiffness" of the factory original units. Have any Club members found a good quality "high performance" shock for these cars?
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1f9a396a-122f-4166-b87b-2c74eb5fb6d6n%40googlegroups.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/B497767F-2C70-4D7E-8387-1BD0E4918FCA%40cox.net.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/029701d8e6eb%24ae49ba00%240add2e00%24%40iowatelecom.net.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/00dd01d8e701%248f6bcd60%24ae436820%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1666545424.11316244%40apps.rackspace.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/00ec01d8e704%24823b00e0%2486b102a0%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to a topic in the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/chrysler-300-club-international/SRYEqLiYsoY/unsubscribe.
To unsubscribe from this group and all its topics, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/010701d8e70d%24f21e6920%24d65b3b60%24%40comcast.net.