Hi Pete,
I have original measurements and a template I
took down in 1990. I'll be home in a week if you can wait that
long. If I recall it was 1/4" on top then an 1/8" space then an
1/8" stripe below. Stripes connected at the front fender but
open at the rear with the top stripe extending slightly further
than the bottom stripe. Hand painted of course. (BTW, the
300J was reverse with the narrow stripe on top).
Mike
Sent from
my Verizon, Samsung Galaxy smartphone
-------- Original message --------
Date: 7/19/22 3:32 AM (GMT+02:00)
Subject: {Chrysler 300} K Pinstripes
Hi Group:
Would someone supply me with the detail specs for K
pinstripes? I need them for Anne’s convertible. I had them some
time ago, but at this point they are nowhere to be found. Any
help will be appreciated. Thanks,
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google
Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1678364990.1771808.1658190735658%40mail.yahoo.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google
Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/2114003858.3208911.1658206477450%40aol.com.