Re: {Chrysler 300} Fan Clutch

Thanks to everyone that replied. I will get a #1705.

When I got one from NAPA their computer showed a 1707 and that's what I bought. I never installed it because I could see right away that it was too tall.

The original fan clutch is 2-3/4" tall and the 1707 is 3-1/2" tall and that would have placed the fan too close to the radiator.

The 1705 is supposed to be 3.09" tall and I believe it should work.

Charlie Valentine

ne 5, 2022, 09:03:32 AM EDT, Marshall Larson <granitledge@xxxxxxxxx> wrote:

The Hayden thermostatic clutch number is 2705. The vicus one which is stock is 1705.

On Sun, Jun 5, 2022 at 7:32 AM 'Charlie V' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Does anyone have a source and a part number for the correct Fan Clutch for a 300G ?
I recently ordered one from NAPA, it was from Hayden, and it was too tall. The fan would have been right against the radiator.

My fan clutch has very little or no resistance when cold or warm...basically all the time.

I would like to find the correct LOOKING fan clutch if possible.

Thanks for listening.

Charlie Valentine

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/254715532.7414732.1654432267013%40mail.yahoo.com.

Marshall Larson