Re: {Chrysler 300} 1959 300 E Starting up cold ….pumping gas

[Ryan Hill <ryan_hillc300@xxxxxxxxxxx>]

I thought the first response was going to be, “install a small electric fuel pump”. This seems to be a preferred method for a lot of members to refill the bowls before cranking. 

I personally like to let it crank a bit before firing if it’s been sitting. I’d rather get some oil moving and splashing.

Ryan Hill

On Apr 3, 2022, at 12:25 PM, dplotkin <dplotkin@xxxxxxxxxxxxxxxxxxx> wrote:

There will be differing views. You can fill each carb bowl with gasoline to avoid grinding the starter pumping fuel. This is the best way to start a car that has not run in a while. Bob has a recent video reviving a sleepy engine, which shows you just how easy it is.

But most of us don't bother.  We're married to our regimen and only too happy to tell others. 

For most of my cars I do this:

Without touching the pedal I crank to the count of 8. Then I set the chokes and hit the pedal for 9 pump shots. Then I wait till the count of 9. This lets the fuel vapors coalesce in the intake and get happy. 

Then I throw the lightening and they start every time.

Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------

From: rob <rob@xxxxxxxxxx>

Date: 4/3/22 3:12 PM (GMT-05:00)

To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>

Subject: {Chrysler 300} 1959 300 E Starting up cold ….pumping gas

I have only had my 300 E for three months or so…it takes quite some time

to get the gas going into the carbs…I have 2 four barrel carbs which takes forever

to become full of gas so it will start.

I am seeking advice on the best procedure in starting to speed up the process.

I pump the gas pedal three or four times before I start cranking the starter…

is it better to pump while cranking or before. Any advice would be appreciated.

Yes once it has run for a while it starts right up easily.

Thanks

Rob Lutts  from Salem Massachusetts 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/2fba117a-e4e0-44b9-9d6f-4243dd251e15n%40googlegroups.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/6249f4b0.1c69fb81.b3e2f.a753SMTPIN_ADDED_MISSING%40gmr-mx.google.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/MW3PR16MB3932F8209D4D379DA52ED878C5E59%40MW3PR16MB3932.namprd16.prod.outlook.com.