On Fri, Apr 1, 2022 at 12:10 PM, Nick Taylor<nicksgaragesd@xxxxxxxxx> wrote:BTW, when you reinstall the gears is anyone putting any coating in there to keep them from sticking in the future?Nick--On Wed, Mar 30, 2022 at 6:42 AM Ron Kurtz <mark6268@xxxxxxxxxxxxx> wrote:--Thanks to all who responded about getting the gear off the hub. I used a hacksaw with level strokes in the gear "valley" cutting through until the geared actually popped open - no cuts into the metal hubs. Took about 10 min. to do all four.Best,Ron KurtzE#292
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1001864144.1395471.1648647730211%40mail.yahoo.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFO7fJz9dEmQ9MJzA90YWn%3D3CDxamdkWbfbKKtikjYasRw%40mail.gmail.com.