{Chrysler 300} Gear Hubs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Gear Hubs



Thanks to all who responded about getting the gear off the hub. I used a hacksaw with level strokes in the gear "valley" cutting through until the geared actually popped open - no cuts into the metal hubs. Took about 10 min. to do all four. 

Best,
Ron Kurtz
E#292

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1001864144.1395471.1648647730211%40mail.yahoo.com.

Attachment: DSC04371.JPG
Description: JPEG image



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.