RE: {Chrysler 300} Masts dull
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: {Chrysler 300} Masts dull



Sadly, none of these companies supply the correct drive cable. The design for 55-6 is unique and is different from later (57 and up) power antennas. So I'm looking to have the cable reproduced, possibly via 3D printing.
 
Again, the dimensions are 3/32" x 5/32" flexible nylon. A photo is attached.
 
Ron


From: Marshall Larson [mailto:granitledge@xxxxxxxxx]
Sent: Saturday, November 27, 2021 3:07 PM
To: Ron Waters
Subject: Re: {Chrysler 300} Masts dull

I have no idea of the dimensions but contact them and see if they can help you!








On Sat, Nov 27, 2021 at 1:52 PM Marshall Larson <granitledge@xxxxxxxxx> wrote:
I meant to post that I had found "the mast drive and cable".

On Sat, Nov 27, 2021 at 1:31 PM Ron Waters <ronbo97@xxxxxxxxxxx> wrote:
Can you post a link to the ones you found that resemble the 55 Chrysler/Desoto cable ? It's a 3/32" x 5/32" rectangular nylon cable.
 
Ron


From: Marshall Larson [mailto:granitledge@xxxxxxxxx]
Sent: Saturday, November 27, 2021 12:50 PM
To: Ron Waters; 300 club
Subject: Re: {Chrysler 300} Masts dull

I did a search for "chrysler power antenna repair kit" and found a number of places that supply the mast drive cable.

On Tue, Nov 23, 2021 at 8:30 PM Ron Waters <ronbo97@xxxxxxxxxxx> wrote:
Just curious. What did you use for the fiberglass line ? I have a 55 power antenna and the line has crumbled. What would you recommend for a replacement ?
 
Ron


From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] On Behalf Of micke.sundbom
Sent: Tuesday, November 23, 2021 2:35 AM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} Masts dull

Speaking of antennas, I have three 57 Chryslers 2 300c  one Imp, all have the same antenna,  power on the right front fender.  I have restored 2 of them cause the fiberglass sling to drive the mast up and down was damaged.  All fine so far, but i realy want better chrome on the mast sections.
 All mine are brass masts but the crome almost missing you can se the brass in spots.. can i rechrome my masts? anyone done this?  new masts?
  On my 60 i fitted dual rears with new cables splitter etc, the antenna expert I found at that time was in Florida and his name was Dennis Turner,  I have been looking for him but most likely I am out too late .. whatever he was incredibly helpful and  provided me with perfect antennas.
 Any idea on the mast is welcome..
Thanks Michael

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DC1FD599ED81400BA01879C0690224FD%40ThinkPadL520.


--
Marshall Larson


--
Marshall Larson


--
Marshall Larson

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/55C3F984C3B543A49934473C92386762%40ThinkPadL520.

Attachment: 55 Power Antenna Nylon Cable.jpg
Description: JPEG image



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.