Re: {Chrysler 300} windshield gasket/seal for G
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} windshield gasket/seal for G



if lanolin is what softens it ( from other post) I wonder if you can just buy that ? 

Sent from my iPhone not by choice 

On 4 Oct 2021, at 4:14 pm, Ron Waters <ronbo97@xxxxxxxxxxx> wrote:

 
It should be noted that this refers to the original GoJo. Not the orange stuff.
 
Ron


From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] On Behalf Of Nick Taylor
Sent: Monday, October 04, 2021 4:07 PM
To: skyhawk@xxxxxxxxx
Cc: Cox Mail; JACK DEMAR; Chrysler 300 Club International
Subject: Re: {Chrysler 300} windshield gasket/seal for G

Any side effects from this process? Does it ooze anything after installation?

On Mon, Oct 4, 2021, 12:49 PM skyhawk@xxxxxxxxx <skyhawk@xxxxxxxxx> wrote:

The Go-Jo process works pretty well for a gasket that is not split or gouged.  I soaked my 300G windshield gasket with the stuff, then placed it in a black trash bag and put it out in the sun for a week.  Soft and pliable once I washed all the goop off.  Even the windshield installer commented on it.  Dennis

-----Original Message-----
From: Cox Mail <scooter465@xxxxxxx>
Sent: Oct 4, 2021 2:48 PM
To: Nick Taylor <nicksgaragesd@xxxxxxxxx>
Cc: JACK DEMAR <oldwoodboat@xxxxxxxxxxx>, <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} windshield gasket/seal for G


Try Murray Park he is the
C body guy.
I also heard that if you soak
Your old gasket with GoJo
Hand cleaner it softens it up.
Bob Haag

On Oct 4, 2021, at 1:38 PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

Pretty much your only source is a used gasket. Check with John Fowlie at Big M in Williams, CA. 

On Mon, Oct 4, 2021 at 9:36 AM JACK DEMAR <oldwoodboat@xxxxxxxxxxx> wrote:
Hello all, I am in need of a new windshield gasket for the G after a lot of google searches and conversations with suppliers I haven't been able to find a source, only some generic extrusions. Is anyone making a proper loop gasket? Quirey indicated he is working on trying to get a source but it's a longer term project. THANKS for any guidance or information. Kind regards/Jack DeMar     

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1270871410.62237.1633365378500%40connect.xfinity.com.

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFNGm7a3Pw2QB8xjkp_JAe3nfVYZW67wF5x2P3i%2BoaL5qQ%40mail.gmail.com.

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/32423C54-3648-4AFC-A99A-03F8C36254AA%40cox.net.

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFOcNPwV10UsFWu4vOnB%3DNYJmT93jgK4hAy8grwRLykX%3DA%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/4D6AF6F652274C8E8226257E6D95BACA%40ThinkPadL520.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CF054D9A-7A63-4482-AFD4-5448CE227B33%40gradyresearch.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.