{Chrysler 300} Power steering pulley on non air car

["'bill grieve' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I'm having clearance problems with the p/s belt and the fan pulley on my 300H. Unfortunately the engine is a 1963 413 until I can find a good S41 HP block. I used the fan pulley and crankshaft pulley from a non air engine. The p/s belt Is nearly touching the fan pulley. Did Chrysler use a different pulley on the p/s pump on non air cars, or am I missing something. I tried to send photos but they were too large and the message didn't go through. Thanks in advance for any help.  Bill G.

Sent from Yahoo Mail on Android

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/399023675.256546.1629423866307%40mail.yahoo.com.