{Chrysler 300} Re: F license frame

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

How did you deal with the brackets for the wings to the quarter panels? Just bend them into place. I'm considering spacing my bumper out as I agree with it being a design flaw.

On Friday, January 8, 2021 at 5:48:07 AM UTC-8 jkg wrote:

more on this ,
another heads up .
When restoring an F I always space bumper back 1/2” with metal blocks so that a tap on rear bumper does not tip the bumper guards into the license frame and crack it . factory design error really ,way too close . light tap will break it . Today’s silver Toyota has lower bumpers too . ( most likely to bump you)
While I do get personal preference / keep stock etc , I think it looks a lot better without the bumper guards . They have a tacked on look to me ; a beautiful clean design on F tail . but to each his own . You do not notice bumper space back at all
Sent from my iPhone not by choice

-- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/13a8b5a0-b05d-4031-a998-5d7bdef70ebdn%40googlegroups.com.