On 12/08/2020 6:26 AM RICHARD HUSS rhuss214192@xxxxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:I just tried to install “hang” the passenger door on my 300G I did nothing more than remove it and strip and prime it. now I can’t get the bottom of the door in far enough. I have adjusted the bottom hinge all the way in. It still is out a 1/4” + along the bottom. Top is fine. the front finder is lined up with the rocker so I don’t want to bring the finder out. Any hints?
Also I am still struggling with the hood shutting all the way. I am able to get both sides to close evenly but still up on both sides a 1/4 or so.
Thanks for any help before I take a hammer to it. Richard
__._,_.___
Posted by: ALLAN POZDOL <apozdol@xxxxxxxxxxx>
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
__,_._,___
- References:
- [Chrysler300] door adjustments
- From: RICHARD HUSS rhuss214192@xxxxxxxxxxx [Chrysler300]
- Prev by Date: [Chrysler300] door adjustments
- Next by Date: Re: {Chrysler 300} Looking for a book - Tex Smith's The Complete Chrysler Hemi Engine Manual by Ron Ceridono
- Previous by thread: [Chrysler300] door adjustments
- Next by thread: Re: [Chrysler300] door adjustments
- Index(es):
Back to the Home of the Forward Look Network Archive Sitemap