I just tried to install “hang” the passenger door on my 300G I did nothing more than remove it and strip and prime it. now I can’t get the bottom of the door in far enough. I have adjusted the bottom hinge all the way in. It still is out a 1/4” + along the bottom. Top is fine. the front finder is lined up with the rocker so I don’t want to bring the finder out. Any hints? Also I am still struggling with the hood shutting all the way. I am able to get both sides to close evenly but still up on both sides a 1/4 or so. Thanks for any help before I take a hammer to it. Richard ------------------------------------ Posted by: RICHARD HUSS <rhuss214192@xxxxxxxxxxx> ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/